Precor P10 Operating And Maintaining Download Page 42

Page: 42 / 144

Operating and Maintaining the P10 Console

Three different types of metrics are captured during a
workout.

Controlled Metrics

can be set and changed. They include:



Resistance Level (AMT, EFX, bike)



Speed (treadmill)



Incline (treadmill)



Crossramp (EFX)

Current Performance Metrics

describe the intensity of a

workout in real time. They include:



Pace (treadmill)



Heart Rate



Speed (bike)



Revolutions/Minute (bike)



Strides/Minute (AMT, EFX)



Watts (bike)

Accumulated Metrics

describe the overall performance

throughout the entire exercise session. They include:



Time Elapsed



Time Remaining



Distance



Calories



Time (bike)



Total Strides (EFX)



Average Speed (treadmill)

Summary of Contents for P10

















































































































































Search results

Summary of Contents for P10

Reviews:

Related manuals for P10

Brands by name

Popular brands

Precor P10, Operating And Maintaining

Search results

Summary of Contents for P10

Reviews:

Related manuals for P10

Brands by name

Popular brands