8. Reinstall the extension tube into the lift platform mounting bracket and secure using
the hitch pin and clevis pin. It may be necessary to slightly rotate the extension tube to
align the clevis pin mounting holes. Choose an adjustment direction that will minimize
the change to the extension tube calibration distance. Firmly hold the jackscrew from
turning while adjusting (rotating) the extension tube.
Operation Verification
9. Return the treadmill to the upright position making sure the treadmill is stable and set-
ting level on the floor, see either the
or the
.
10. Reinstall the hood.
11. Connect the power cord and switch the power
ON
.
12. Verify incline operation from the minimum to maximum levels. Verify that the incline
reaches maximum and minimum levels and the up/down movement is smooth. Verify
that there are no unusual noises.
13. Do the Operation Verification tests (see
"Operation Verification" on page 24
) and
return to service.
Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.
Page 79
5 Adjustment Procedures
Lift Motor Calibration
