US SAE bolts
: The bolt grade markings are determined by the number of the lines stamped
on the head of the bolt. The number of lines is always two less than the grade of the bolt.
Count the lines, add two, and you can determine the grade of the bolt.
Metric bolts
: On metric bolts, the bolt grade is identified by a bolt grade number stamped
on the head of the bolt.
CAUTION
: Always replace bolts with the same grade bolt. If you don’t know the
grade of the replacement bolt –
DO NOT USE THE BOLT
.
Bolt Grade Markings Chart
Example bolt grades used on Precor equipment (may not represent all bolt grades). Always
match the replacement bolt grade marking to the removed bolt grade marking.
Parts
Parts
IMPORTANT
: Always purchase OEM replacement parts and hardware from Pre-
cor. If you use parts not approved by Precor, you could void the Precor Limited War-
ranty. Use of parts not approved by Precor may cause injury.
There is a copy of the parts
Exploded View Diagram
and
Parts Identification List
included in
the Parts chapter (see
)that you can use as a quick reference. It is recommended that
you go to the servicer partners
(or
) website to view
the most current parts information including the
Exploded View Diagram
and
Parts Iden-
tification List
.
Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.
Page 14
2 General Information
Parts