ASL State
DESCRIPTION
other hard failure. On P10, P30, P30i and P31 consoles the ASL bright-
ness is set to OFF.
Blue Solid
Normal operation Indicates that the ASL has not detected any logged
error codes.
Blue Pulsing
Preventative maintenance reminder.
Treadmills: A belt rating of 0 or 1 will cause a blue pulsing ASL light
indicating that there is a problem with the running belt/deck and is in
need of servicing or replacement.
Ellipticals: The maintenance counter starts at 1000 hours and counts
down the active use hours to 0. When the counter reaches zero hours,
the ASL will begin pulsing blue indicating preventative maintenance is
due.
Yellow Solid
Indicates an error has occurred, was self-corrected and the machine
can be used. The fault can be cleared.
Yellow Pulsing
There is a current non-recoverable fault condition, there is a loss of a
major function and the machine is out-of-service. Machine service is
required.
ASL Settings and Functions
Setting the ASL light brightness level
The ASL Light Brightness level settings are HIGH, MEDIUM, and LOW. On P10, P30, P30i
and P31 consoles, the light brightness level can be switched OFF.
l
On P10, P30, P30i and P31 consoles, the OFF setting switches the ASL light bright-
ness OFF for all ASL state conditions. Setting the ASL Light Brightness OFF only
switches the ASL light brightness OFF and not the ASL active status functionality.
l
Regardless of the brightness level setting (including OFF), you can view the current
ASL state (blue, yellow, etc.) in the service access menus, see
.
P10, P30, P30i and P31 consoles:
Access
Hardware Validation
(51765761) >
AS LIGHT BRIGHTNESS
> select
HIGH
,
MED
,
LOW
, or
OFF.
P62, P80, and P82 consoles:
Access
Hardware Validation
(51765761) >
Maintenance
menu >
AS LIGHT
BRIGHTNESS
> select
HIGH
,
MED
, or
LOW.
Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.
Page 238
7 Troubleshooting
Active Status Light (ASL)
