PRECITEC CHRocodile CLS0.2 Operation Manual Download Page 33 | Manualshive

Page: 33 / 74

background image

33

3.2

CHRocodile CLS Explorer and Drivers installations

3.2.1

CHRocodile CLS Explorer installation:

CHRocodile CLS Explorer is a Man-Machine interface which allows to configure, to visualize
measurement, to update firmware, to load calibration table, to save data etc…

Two versions of CLS Explorer are now available:

-

Premium version is delivered with the CLS sensor,

-

Ultimate version allows to perform sample scanning.

Refer to CHRocodile_CLS_Explorer_User_Manual to obtain more specifics information.

3.3

Communication with CHRocodile CLS

There  are  three  possible  way  to  communicate  with  the  CHRocodile  CLS:  via  the  CHRocodile  CLS
Explorer  software,  via  the  CHRocodile  CLS  DLL  and  using  the  ASCII  commands  sent  to  the
CHRocodile CLS via serial interface (RS232 or RS 422) or Ethernet. Up to 3 CHRocodile CLS can be
connected and controlled by  a single computer (Windows XP, Windows 7 or Windows 8 OS, 32 and
64bits). CHRocodile CLS is automatically detected through Ethernet network (broadcast mode).

3.3.1

Via CHRocodile CLS Explorer:

Premium version of CHRocodile CLS Explorer software is delivered with the sensor and is useful to
configure sensor, to visualize continuous measurements, to perform statistic and to save data.

Additionally to these functionalities, Ultimate version of CHRocodile CLS Explorer allows to perform
3D scanning acquisition. In order to use the Ultimate version you need:

-

A 2-axis scanning system,

-

An interface DLL allowing to interpret the standard commands of your 2-axis system (move,
free run etc…). This slight DLL has to be written by the customer following interface
specifications given by PRECITEC (Cf. CHRocodile_CLS_Explorer_User_Manual),

-

A non-free license (USB key).

A demo license can be activated remotely, in order to allow customer testing the Ultimate version.
As demo license has a limited duration, it is preferable to activate this demo license when the interface
DLL is ready.

In order to obtain further detailed on CHRocodile CLS Explorer functionalities, please refer to
CHRocodile_CLS_Explorer_User_Manual.

«
...
31
32
33
34
35
...
»

Summary of Contents for CHRocodile CLS0.2











































































Reviews:

No comments

Related manuals for CHRocodile CLS0.2

Brand: Datalogic Pages: 248

Brand: BAFANG Pages: 9

E-P2 - PEN 12.3 MP Micro Four Thirds Interchangeable Lens Digital...

Brand: Olympus Pages: 2

AS4000 - AS Transcription Kit

Brand: Olympus Pages: 24

Brand: Öhlins Pages: 10

Brand: +GF+ Pages: 36

Brand: Nauticam Pages: 33

Brand: StarTech.com Pages: 10

Feiyu Pocket 2S

Brand: FEIYUTECH Pages: 19

Brand: Actia Pages: 37

Brand: IHP Pages: 4

Brand: N-Com Pages: 36

Brand: InFocus Pages: 3

Brand: muth Pages: 10

Coolfreeze CF-40

Brand: Waeco Pages: 284

Brand: Vente Unique Pages: 49

Brand: Ranger design Pages: 22

Quantum hardcoated N30216

Brand: National Cycle Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands