PREBENA
Wilfried Bornemann GmbH & Co. KG
BEFESTIGUNGSTECHNIK
– FASTENING TECHNOLOGY
9
6.5.5
Drehrichtung umstellen (Dieser Punkt betrifft nur 400V Kompressoren)
6
ACHTUNG: BEIM STROMANSCHLUSS SPIELT DIE PHASENFOLGE EINE
WICHTIGE ROLLE, DA DIESE ÜBER DIE DREHRICHTUNG DER MOTORWELLE
ENTSCHEIDET. DIE DREHRICHTUNG MUSS MIT DER ANGABE AUF DER
RIEMENSCHEIBE ODER MIT DER MARKIERUNG AUF DEM LÜFTERGEHÄUSE
DES ELEKTROMOTORS ÜBEREINSTIMMEN. EIN RÜCKWÄRTSDREHEN DER
WELLE KANN DIE FUNKTION DES KOMPRESSORS BEEINTRÄCHTIGEN!
So steuern Sie die Drehrichtung:
1
Stellen Sie sicher, dass der Druckschalter auf „O“ oder, je nach Modell auf
„OFF“ steht.
2
Schließen Sie das Kompressorkabel bzw. den Stecker an die elektrische
Stromversorgung an.
3
Wenn der Anschluss über einen Vor-Ort-Schalter erfolgt, dann schalten Sie
diesen ein.
4
Aktivieren Sie den Kompressor über den Druckschalter und schalten Sie ihn
sofort wieder aus. Drehen Sie den Schalter dazu auf Position „I“ und dann
sofort wieder zurück auf „O“ oder, je nach Modell, auf „AUTO“ und dann
sofort wieder zurück auf „OFF“.
5
Wenn sich der Lüfter der Markierung entsprechend dreht, stimmt die
Richtung, andernfalls müssen die beiden Phasenkabel vertauscht werden.
6.6
Erstinbetriebnahme
6.6.1
Achten Sie vor der ersten Inbetriebnahme und jedes Mal, wenn Sie mit der Arbeit
beginnen, darauf, dass:
das elektrische Kabel nicht beschädigt und das Gerät richtig geerdet ist;
Stoßdämpfer und Räder des Kompressors sicher befestigt sind;
die Leitungen fest angeschlossen sind;
das Sicherheitsventil, Betriebs- und Steuereinrichtungen vorhanden und
funktionstüchtig sind;
Bei ölgeschmierten Kompressoren: der Ölstand im Kurbelgehäuse des
Kolbenzylinders korrekt ist
(Punkt 8.2.1)
;
Bei riemengetriebenen Kompressoren: die Schutzvorrichtungen des
Keilriemenantriebs vorhanden und sicher montiert sind;
Abbildung 2
Summary of Contents for MOUNTAINE 950
