PREBENA
Wilfried Bornemann GmbH & Co. KG
BEFESTIGUNGSTECHNIK
– FASTENING TECHNOLOGY
15
Tableau 2
Filetage
Couple de serrage
minimal
Couple de serrage
maximal
М6
9 Nm
11 Nm
М8
22 Nm
27 Nm
М10
45 Nm
55 Nm
М12
76 Nm
93 Nm
8.2.6
Vérifiez la tension de la courroie (compresseurs à entraînement par courroie
uniquement)
Vérifiez la tension de la courroie après les 50 premières heures de fonctionnement, puis
toutes les 300 heures. Si nécessaire, réglez la tension et nettoyez la courroie. Si la
tension est trop faible, la courroie glisse, ce qui provoque des vibrations. Celles-ci
abîment les roulements en raison du changement de transfert de charge. Les poulies
surchauffent et le coefficient de performance du cylindre à piston diminue. Si les
courroies sont trop serrées, les roulements sont surchargés, l'usure augmente et le
moteur électrique et le cylindre à piston surchauffent.
Pour vérifier la tension de la courroie :
1
Éteignez le compresseur conformément au
point 6.7
.
2
Retirez le dispositif de protection.
3
Utilisez la force F avec 30...40 N perpendiculaire au milieu de la courroie
(figure 4)
.
4
Mesurez le mouvement X
(figure 4)
. Le fléchissement de courroie X doit être de
5...6 mm.
5
Si nécessaire, réglez la tension de la courroie. Après avoir desserré les vis
maintenant le moteur sur la plaque de base, réglez la tension en déplaçant le
moteur électrique. Assurez-vous que le moteur électrique et les poulies du
cylindre à piston sont à niveau égal.
6
Attachez le moteur et montez le dispositif de protection.
Figure 4
Summary of Contents for MOUNTAINE 950
