17
How to remove the Macintosh interface module
1) Turn off the power to your printer, computer, and all SCSI devices connected.
Unplug the power cord from the power source and the printer.
2) Remove the Macintosh interface module by gently pulling the plastic handle
at the bottom of the module as sho wn in the picture and lifting the module
away from the printer.
Connecting the printer to your computer
1.
Make sure that the power to your computer is completely
turned off. If the computer is running, quit all running ap-
plications, shut down the system, and turn off the power.
Caution
•
Both printer and computer must be unplugged before con-
necting or disconnecting the printer cable. Otherwise, dam-
age or malfunction may result.
•
Use a high-impedance SCSI cable and an active terminator
for best results.
•
Using other types of cables can cause the printer to malfunc-
tion.
2.
Connect the printer to the computer with a SCSI cable.
Secure the printer cable to the connectors on the printer
and on the computer.
Also, you must attach a terminator to the printer if the printer is
the last peripheral on the SCSI chain.
MACINTOSH – Getting Your Printer Ready
SCSI cable
SCSI interface
connector
Terminator
DIP switches
