16
Chapter 1 - Major Functions and Operations
Connecting SCSI Cables for Macintosh
When your printer is properly set up, connect the printer to your Macintosh with a
SCSI cable, and to a suitable AC power source with the power cord.
•
Connect the printer to your computer.
•
Connect a power cord to the printer.
How to attach the Macintosh interface module
When using your printer with a Macintosh computer, connect the pr inter to the
computer using a Macintosh interface module as shown in the pictures below.
1) Turn off the power to your printer, computer, and all SCSI devices connected.
Unplug the power cord from the power source and the printer.
2) Remove the rectangular plastic connector co ver located to the r ight of the
printer port. Grab the tab at the bottom of the connector cover, pull it up, and
twist it until the cover breaks away.
3) Angle the Macintosh interface module so that the tab on top of the module
slips under the top edge of the PC pr inter cable slot. The top edge of the
module should rest against the frame of the printer.
4) Gently press the bottom of the module until it clicks into place.
Caution
When you connect the Macintosh interface module, make sure
that the printer power has been turned off. Never plug in the
power cord before connecting the module. Doing so can cause
the printer to malfunction.
Macintosh interface module
