58
Chapter 1 – Major Functions and Operations
Step 3
❿
Load Sheets
Load up to 10 composition covers; ClearCovers must be fed one at a time.
1.
Pull up the support.
2.
Place the sheet(s) in the sheet feeder.
Note
• Using creased or curled sheets can cause a sheet to misfeed.
• Fan the stack once before placing it in the feeder. The printer
may feed two sheets together if the sheets are slightly stuck
together.
• Use only one type of sheet at a time.
• Place a stack of not more than 10 sheets composition covers
or 1 ClearCover into the sheet feeder.
3.
Adjust the feed guide to the proper size.
Leave about 0.02” between the feed guide and the sheet(s).
The stopper will prevent the sheets from rising.
Support
Feed guide
Stopper
