41
Step 3
❿
❿
Load Sheets
Load up to 10 composition covers; ClearCovers must be fed one at a time.
1.
Pull up the support.
2.
Place the sheet(s) in the feeder.
Note
• Using creased or curled sheets can cause a sheet to misfeed.
• Fan the stack once before placing it in the feeder. The printer
may feed two sheets together if the sheets are slightly stuck
together.
• Use only one type of sheet at a time.
• Place a stack of not more than 10 composition covers or 1
ClearCover in the sheet feeder.
3.
Adjust the feed guide to the proper size.
Leave about 0.02” between the feed guide and the sheet(s).
The paper stopper will prevent the sheets from rising.
WINDOWS – Printing Operations
Support
Feed guide
Stopper
