Installation and operator’s manual
Page 43 of 65
PVI-2000-OUTD-AU Rev.: 1.0)
5.5
LCD Display
The 2-line LCD display is located on the front panel and shows:
9
the status of the inverter and statistical data;
9
service messages for the operator;
9
messages of faults or damages found.
Data are shown cyclically, the screens change every 5 seconds. On the right of the
display there is a button that when pressed freezes the screen. Pushing the button
again unfreezes the screen. When AURORA is turned on the display shows the
following screen for about 10 seconds:
Afterwards it begins to check the grid. While checking the grid the display shows
the three following screens cyclically:
9
This screen shows how many seconds are left before a new grid connection
Attempt will start
9
The following screen shows the measured value of the insulation resistance:
Initializing......
Please Wait
Next Connection
###### sec
Measuring Riso
……………