Installation and operator’s manual
Page 27 of 65
PVI-2000-OUTD-AU Rev.: 1.0)
3.6
Electrical connections
Step 1/4: Open the Ac disconnect switch
Step 2/4: Open the Dc disconnect switch
Step 3/4: Connect AURORA to the Ac disconnect switch
WARNING:
Use proper, low impedance wires to connect AURORA to the
Ac disconnect.
WARNING:
AURORA must be connected to the AC disconnect switch
with a tripolar wire: a phase conductor, a neutral conductor and a yellow-
green one for the earth connection (PE protection).
1)
Lay the wire between AURORA and the Ac disconnect switch
2)
Enter the wire in the Binder counterpart connector provided, taking care
to respect the indications present on the plastic near the terminal blocks
(as indicated in Fig. 11): terminal block 1 for Neutral, terminal block 2
for the line, terminal block 3 not connected, and the terminal block
identified by the symbol for the PE earth connection.
3)
Connect the Binder connector
Fig. 12 Binder connector