Installation and operator’s manual
Page 29 of 65
PVI-2000-OUTD-AU Rev.: 1.0)
3.7
Access to the terminal blocks by removing the right side panel
WARNING:
To avoid the risk of electric shock from energy stored in
capacitors. Wait 5 minutes after disconnecting both Ac and Dc
connections before opening the side panel.
To remove the side panel unscrew it using the Torx TX20 wrench supplied with
the inverter kit.
Fig. 13 Removing the side panel
After operation the side panel screws shall be tightened with a torque of 1.5 Nm (13.2
in-lbs) to ensure watertight sealing.