8785115
200A Multi-Process Welder with LCD Display
V4.0
18
For technical questions call 1-800-665-8685
IDENTIFICATION KEY
A Handle
B Side Door Latch
C Control Panel
D MIG Socket
E Remote Connector
F
Ground Lead
G Positive Outlet Socket
H Negative Outlet Socket
I
Dinse Connector
J
MIG torch
K Power Switch (on rear)
L Gas Inlet Valve (small
connector on rear)
M Power Socket (large
connector on rear)
PANEL IDENTIFICATION
P1 Gas Check Button – Press to
check that there is gas flow.
P2 Wire Check Button – Press to
confirm wire spools out.
P3 Multi-function Adjusting Knob
P4 LCD
P5 Home Key – Press to return to
the home menu.
P6 Return Key – Return to the previous menu.
P7 Auxiliary Knob – Adjust the voltage
Fig. 1
Fig. 2
