V4.0
200A Multi-Process Welder with LCD Display
8785115
Visit www.princessauto.com for more information
19
LCD PANEL
The welding machine’s functions and set-up instructions are controlled through
a 4.3 in. LCD panel interface. Selections on screen are made by turning the
multi-function adjustment knob (P3) to the selection and pushing the knob to
highlight the screen. The return key (P6) returns the screen to the previous
selection and the home key (P5) returns the multi-functions selection screen.
MULTI-FUNCTIONS SCREEN
The multi-functions screen displays eight welding
options plus the interface settings option. The
selected option and the title indicates the type of
welding and workpiece material.
OUTPUT SET-UP
Selecting the welding option will open the output set-up
screen. This displays the welding unit configuration. In
Fig. 4
the dinse connector (I) is plugged into the
positive output for stick welding. The ground cable
would plug into the other polarity outlet.
ELECTRODE OR WIRE SIZE
The welding machine uses either an electrode or
welding wire to create the arc.
The electrode screen offers two choices of electrode
type 60xx or 70xx base.
The wire size screen offers different wire size choices
based on the material selected.
Select the size that is appropriate for your welding task.
MATERIAL THICKNESS
The thickness screen displays the different
thicknesses of the workpiece in mm. Turn the multi-
function adjustment knob (P3) for the correct
thickness, then push the knob in to select it.
Fig. 3
Fig. 4
Fig. 5
Fig. 6
