8785115
200A Multi-Process Welder with LCD Display
V4.0
8
For technical questions call 1-800-665-8685
6. Immediately replace a cracked or broken helmet or a scratched or
damaged lens filter to avoid damage to the eyes or face from arc flash or
ejected molten material.
7. Do not allow the welding stick to accidentally touch the ground clamp or
grounded work. An arc flash will result from contact and can injury the
unprepared user and bystanders.
8. Do not handle hot metal or electrode stubs with bare hands. Handling may result
in a burn injury.
9. Do not use the welding unit if personal movement is confined or if there is a
danger of falling.
10. Keep all panels and covers securely in place when operating the welding
unit.
11. Insulate the ground clamp when not connected to a workpiece to prevent
contact with any metal object.
12. Do not operate the welding unit if the torch, electrode holder, welding cable
or ground cable are wet. Do not immerse them in water. These
components and the welding unit must be completely dry before
attempting to use them.
13. Never dip the electrode in water for cooling.
14. Remove the electrode from the holder when not in use.
15. Do not point the torch or electrode holder at any body part of yourself or at
anyone else.
16. Do not use a welding unit to thaw frozen pipes.
17. Insulate yourself from the work and the ground using dry insulation. Make
certain that the insulation is large enough to cover your full area of physical
contact.
18. When not welding, make certain that no part of the electrode circuit is touching
the workpiece or the ground. Accidental contact can cause overheating and
create a fire hazard.
19. Maintain good ventilation of the louvers on this equipment. Good
ventilation is of critical importance for the normal performance and service
life of this equipment.
