5-62
PFC-6075 • 5403593 • Rev C • 2/13
Programming Functions Overview
The table below gives you a snapshot of the menu order along with a brief description of each. Details for these options are
provided on the following pages.
Programming Menu Overview
Table 12:
Menu Option
Description
Remote Access Code
Displays remote access
“User Name”
and
“Password”.
Job Details
Allows site specific information to be entered.
General Options
Allows software’s general panel settings to be customized, such as alarm verification time, and
door holder low AC dropout delay.
Zones
Define and configure zone’s characteristics and mapping points.
Cross Zones
establish relationships between multiple zones.
Points
Define and view all addressable and non-addressable points.
Sensitivity
enable Day/Night Sensitivity, setup Holiday schedule, and other related sensitivity options.
E-mail Reporting
Schedule e-mail reports by day and time; setup e-mail addresses, and select type of report(s) to
send to each e-mail addressee.
e-mail Reminders
Create and schedule customized daily, weekly, monthly or yearly reminder e-mails.
Users
Create up to ten (10) user codes and passwords, and set access rights.
LAN Settings
Configure ethernet connectivity options.
Dialer
Add or remove DACT module/appliance.
IP Reporting
Configure IP reporting options for primary and secondary accounts.
Class A Card
Add or remove Class A card.
Annunciators
Add or remove Remote Annunciators.
SLC Loop
Add or remove SLC Loops.
Power Supply
Add or remove Power Supplies.
DRv-50
Add or remove DRv-50 driver modules.
LeD-16
Add or remove LeD-16 Annunciators.
RLY-5
Add or remove RLY-5 modules.
FCB-1000
Add or remove FCB-1000 modules.
SPG-1000
Add or remove SPG-1000 modules.
FIB-1000
Add or remove FIB-1000 modules.
