POSIFLEX PG-200/2D-O Advanced Manual Download Page 103

Page: 103 / 122

- 98 -

5.1.1. Multiple read reset time

This option can be used in conjunction with multiple read mode.



for Laser and CCD readers, it sets the time that the reader should be pointed

away from the label before it can decode the same label again



for Image readers, it sets the number of frames that the reader should be pointed

away from the label before it can decode the same label again

Indefinitely means that the next bar code must always be different, during the time the

bar code reader is triggered. For the image reader the multiple reset time is not

measured in ms, but in frames. The duration of each frame is variable, and is

dependent of the captured image. See figure 5.01.

SET

50ms

100ms

200ms

300ms

400ms

500ms

600ms

Indefinitely

END

Summary of Contents for PG-200/2D-O



























































































































Search results

Summary of Contents for PG-200/2D-O

Reviews:

Related manuals for PG-200/2D-O

Brands by name

Popular brands

POSIFLEX PG-200/2D-O, Advanced Manual

Search results

Summary of Contents for PG-200/2D-O

Reviews:

Related manuals for PG-200/2D-O

Brands by name

Popular brands