POSIFLEX PG-200/2D-O Advanced Manual Download Page 101

Page: 101 / 122

- 96 -

Trigger repeat:

This option makes it easier to select a single bar code from a sheet filled with bar

codes. If the trigger switch is pressed once, the laser beam is on during the configured

read time. The laser beam can now be moved to the required bar code. If the trigger

switch is pressed again, the bar code is decoded and transmitted. If the read time

expires, the laser switches off and the trigger sequence should be repeated. If the read

time is set to 0, then if the trigger switch is pressed, the laser is on, but does not accept

bar codes. As soon the trigger switch is released, the barcode is decoded and

transmitted. Support for this option is reader dependent.

Structured append time out:

When a bar code consists of multiple physical bar codes, this time out value is used.

The next bar code must be read before this time out is expired. The time out value is

between 1 and 255 seconds. This value can be configured by reading 1 up to 3 direct

input numeric characters from chapter: String options. Default the structured append

time out is set to 30 seconds.

Summary of Contents for PG-200/2D-O



























































































































Search results

Summary of Contents for PG-200/2D-O

Reviews:

Related manuals for PG-200/2D-O

Brands by name

Popular brands

POSIFLEX PG-200/2D-O, Advanced Manual

Search results

Summary of Contents for PG-200/2D-O

Reviews:

Related manuals for PG-200/2D-O

Brands by name

Popular brands