POSIFLEX PG-200/2D-O Advanced Manual Download Page 72

Page: 72 / 122

- 67 -

SET

No case conversion

Convert to upper case

Convert to lower case

Exchange case

END

4.2. Set prefix and suffix

A prefix and suffix of maximum 4 direct input entries each may be included in front

and at the end of the string respectively.

Keyboard wedges may additionally be programmed with the special keys supported

by the keyboard, e.g. function keys.

Default settings are:
• Wedge: Prefix - None, Suffix – return

How to set a prefix or a suffix:

To configure a prefix for example for Code-39 as C39: scan the following labels from
this current chapter ‘String Options’:

<SET>

<C>

<3>

<9>

<:>

<END>

Bar code readers which do not support a different prefix or suffix for each symbology

have to make use of <ALL>.

Summary of Contents for PG-200/2D-O



























































































































Search results

Summary of Contents for PG-200/2D-O

Reviews:

Related manuals for PG-200/2D-O

Brands by name

Popular brands

POSIFLEX PG-200/2D-O, Advanced Manual

Search results

Summary of Contents for PG-200/2D-O

Reviews:

Related manuals for PG-200/2D-O

Brands by name

Popular brands