POSIFLEX PG-200/2D-O Advanced Manual Download Page 58

Page: 58 / 122

- 53 -

Encodable characters:



GS1 Databar and GS1 Databar Limited: digits 0 up to 9



GS1 Databar Expanded: subset of ISO 646: upper, lower case characters, digits,

20 punctuation characters and function character FNC1

The next GS1 Databar versions are supported



Omnidirectional/Truncated/Stacked(refer to GS1 Databar)



Limited (refer to GS1 Databar Limited)



Expanded, Expanded stacked(refer to GS1 Databar Expanded)

For string format see figure 3.39 or 3.40.

Options for GS1 Databar:



transmission of CD



transmission of Application Identifier

Not transmit CD:

Do not transmit the last character of GS1 Databar.

SET

Not transmit CD

Transmit CD

Not transmit Application

Identifier

Transmit Application

Identifier

END

Summary of Contents for PG-200/2D-O



























































































































Search results

Summary of Contents for PG-200/2D-O

Reviews:

Related manuals for PG-200/2D-O

Brands by name

Popular brands

POSIFLEX PG-200/2D-O, Advanced Manual

Search results

Summary of Contents for PG-200/2D-O

Reviews:

Related manuals for PG-200/2D-O

Brands by name

Popular brands