POSIFLEX PG-200/2D-O Advanced Manual Download Page 71

Page: 71 / 122

- 66 -

4. STRING OPTIONS

This chapter describes the alterations which can be made to the format of the

transmitted data string.

Options available are:

Case conversion



conversion of bar code data

The bar code data has the format as described in chapter ‘Code Options’.

Set prefix and suffix



transmission of a preamble (common prefix)



transmission of a postamble (common suffix)



transmission of a prefix



transmission of a suffix

The string format is transmitted as in figure 4.01.

The input entries are described in this chapter.

4.1. Case conversion

The bar code data may be converted to

either lower or upper case or the case may

be exchanged. These options may be used

if the user of a wedge has a preference to

leave for instance the CAPSLOCK on or

if the host requires upper case characters

only. See figure 4.02.

Summary of Contents for PG-200/2D-O



























































































































Search results

Summary of Contents for PG-200/2D-O

Reviews:

Related manuals for PG-200/2D-O

Brands by name

Popular brands

POSIFLEX PG-200/2D-O, Advanced Manual

Search results

Summary of Contents for PG-200/2D-O

Reviews:

Related manuals for PG-200/2D-O

Brands by name

Popular brands