POSIFLEX PG-200/2D-O Advanced Manual Download Page 26

Page: 26 / 122

- 21 -

Enable Micro QR Code

D2U

Enable Maxicode

BCE

Enable PDF417

BCF

Enable MicroPDF417

BCG

Enable all 1D codes

BCM

Enable all 2D codes

BCN

Disable all

END

3.2. Setting of number of characters

If you are going to read bar codes of known length, it is recommended to set the

reader for a fixed number of characters. This can be done for up to two lengths. The

reader uses this to verify that labels read are of the correct length, rejecting any labels

which do not have the specified length. The advantage of setting a fixed length, is that

it provides protection against short scans of labels, such as Interleaved 2of5, which do

not provide sufficient security against partial scan. The length checking is done on the

label data and is not affected by options such as (not) transmit start/stop character or

check digit. Setting the number of characters does not affect fixed length codes, such

as EAN-13. 2D symbologies such as PDF417 and Data Matrix are also not affected

by fixed length settings.

The following options are available:

Fixed length OFF all codes.

This option cancels the fixed length checking.

Summary of Contents for PG-200/2D-O



























































































































Search results

Summary of Contents for PG-200/2D-O

Reviews:

Related manuals for PG-200/2D-O

Brands by name

Popular brands

POSIFLEX PG-200/2D-O, Advanced Manual

Search results

Summary of Contents for PG-200/2D-O

Reviews:

Related manuals for PG-200/2D-O

Brands by name

Popular brands