POSIFLEX PG-200/2D-O Advanced Manual Download Page 120

Page: 120 / 122

- 115 -

GUI:

This key is the Windows key on a Microsoft keyboard or the Command key on a

Apple keyboard.

HID:

An acronym for Human Interface Device. Keyboard, mouse and barcode readers

belong to this category.

IEEE 802.15.4:

A wireless transmission protocol that uses radio frequency waves.

Intensity:

The amount of radiant or luminous flux per unit solid angle that is diverging from a

light source.

Inter character delay:

The time between transmitting two characters.

Interface:

Allows devices to communicate with each other. Used most often to refer to the

design of hardware and software which allows connection of network components

and transfer of information.

Keyboard wedge:

This device permits you to connect a bar code reader between the computer and it's

keyboard by way of an Y-cable. The computer "suggests" that the scanned data is

keyboard entered. Normal software can still be used.

Parity:

A method of checking for errors in transmitted data. The eight bits of each transmitted

character are added, and the total must always be an odd number for odd parity and an

even number for even parity. If the total is wrong, the communications software

detects that an error has occurred during transmission and may request that the data is

retransmitted.

Preamble:

Also known as common prefix. This is one or more characters, which accompany the

transported data. The preamble is put in front of the code specific prefix and the bar

code data itself.

Prefix:

One or more characters which accompany transported data. A prefix is put in front of

the data and is part of the frame.

Summary of Contents for PG-200/2D-O



























































































































Search results

Summary of Contents for PG-200/2D-O

Reviews:

Related manuals for PG-200/2D-O

Brands by name

Popular brands

POSIFLEX PG-200/2D-O, Advanced Manual

Search results

Summary of Contents for PG-200/2D-O

Reviews:

Related manuals for PG-200/2D-O

Brands by name

Popular brands