POSIFLEX PG-200/2D-O, Advanced Manual

Page: 52 / 122

- 47 -
Enable GS1-128 if possible:
In this mode the decoded data characters are translated to the GS1-128 format. If the
data does not comply with the GS1-128 format, then the label is transmitted as Code
128.
SET
Disable GS1-128 OF
Enable GS1-128
only
JF
Enable GS1-128 if
possible
OG
Disable
concatenation MP
Enable
concatenation
MO
END
3.3.12. Options for Code 93
Code 93 is a variable length symbology with 2 mandatory check digits and non
printable start/stop characters. The following characters are supported:

the digits 0 upto 9

the upper case characters A upto Z

the characters - . $ / + % SPACE

4 non printable shift characters
The first check digit (C) is the modulo 47 sum of the weighted data character values.
The second check digit (K) is the modulo 47 sum of the weighted data character
values including the first check digit (C). The check digits are not transmitted.
The special shift characters are control characters and are not transmitted with the
data. If one of these characters is followed by an upper case character 'A' upto 'Z', it is
transmitted as 1 single character. In case of an invalid combination, the label is
rejected. This method enables support for full 128 ASCII characters encodation. The
encodation is compatible with the Code 39 $, %, / and + characters. For string format
see figure 3.34.