manualshive.com logo in svg

Pontiac 2001 Bonneville, Owner'S Manual

Share
Download
Pontiac 2001 Bonneville Owner'S Manual Download Page 61

1-49

4. To tighten the belt, pull up on the shoulder belt while

you push down on the child restraint. If you’re using
a forward

-

facing child restraint, you may find it

helpful to use your knee to push down on the child
restraint as you tighten the belt.

5. Push and pull the child restraint in different

directions to be sure it is secure.

To remove the child restraint, just unbuckle the vehicle’s
safety belt and let it go back all the way. The safety belt
will move freely again and be ready to work for an adult
or larger child passenger.

Securing a Child Restraint in the 
Right Front Seat Position

Your vehicle has a right front passenger air bag. Never
put a rear

-

facing child restraint in this seat. Here’s why:

CAUTION:

A child in a rear

-

facing child restraint can be

seriously injured or killed if the right front
passenger’s air bag inflates. This is because the
back of the rear

-

facing child restraint would be

very close to the inflating air bag. Always secure
a rear

-

facing child restraint in the rear seat.

Summary of Contents for 2001 Bonneville






























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands