manualshive.com logo in svg

Pontiac 2001 Bonneville, Owner'S Manual

Share
Download
Pontiac 2001 Bonneville Owner'S Manual Download Page 318

6-33

To be sure the vent hose (A) is properly attached, the
vent hose connectors (B) must be securely reattached to
the vent outlets (C) on each side of the battery, and the
vent assembly grommet (D) must be secured to the 
floor pan (E).

Vehicle Storage

If you’re not going to drive your vehicle for 25 days or more, 
remove the black, negative (

-

) cable from the battery. 

This will help keep your battery from running down.

CAUTION:

Batteries have acid that can burn you and gas
that can explode. You can be badly hurt if you
aren’t careful. See “Jump Starting” in the Index
for tips on working around a battery without
getting hurt.

Contact your dealer to learn how to prepare your vehicle
for longer storage periods.

Also, for your audio system, see “Theft

-

Deterrent

Feature” in the Index.

Summary of Contents for 2001 Bonneville






























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands