manualshive.com logo in svg

Pontiac 2001 Bonneville, Owner'S Manual

Share
Download
Pontiac 2001 Bonneville Owner'S Manual Download Page 123

2-56

Sun Visors

To block out glare, you can swing down the visors. You
can also remove them from the center mount and swing
them to the side, while the auxiliary sunshade remains to
block glare from the front.

Visor Vanity Mirror

Open the cover to expose the vanity mirror.

If your vehicle has the optional lighted vanity mirrors,
the lamps come on when you open the cover.

Air Inflator System (Option)

Some vehicles have an air inflator for use in maintaining
proper air pressure for the tires. The air inflator is
located in the trunk. The air inflator will work only 
with the ignition on.

Pressing the AIR button will activate the inflator for 
ten minutes.

The air inflator comes with a kit that includes a 
20

-

foot (6.1 m) hose and an air pressure gage, as 

well as instructions and special adapters for inflating
things like an air mattress or a basketball.

CAUTION:

Inflating something too much can make it
explode, and you or others could be injured. Be
sure to read the inflator instructions, and inflate
any object only to its recommended pressure.

Summary of Contents for 2001 Bonneville






























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands