manualshive.com logo in svg

Pontiac 2001 Bonneville, Owner'S Manual

Share
Download
Pontiac 2001 Bonneville Owner'S Manual Download Page 140

2-73

Air Bag Readiness Light

There is an air bag readiness light on the instrument
panel, which shows AIR BAG. The system checks the
air bag’s electrical system for malfunctions. The light
tells you if there is an electrical problem. The system
check includes the air bag sensors, the air bag modules,
the wiring and the crash sensing and diagnostic module.
For more information on the air bag system, see 
“Air Bag” in the Index.

This light will come on
when you start your vehicle,
and it will flash for a few
seconds. Then the light
should go out. This means
the system is ready.

If the air bag readiness light stays on after you start the
vehicle or comes on when you are driving, your air bag
system may not work properly. Have your vehicle
serviced right away.

CAUTION:

If the air bag readiness light stays on after you
start your vehicle, it means the air bag system
may not be working properly. The air bags in
your vehicle may not inflate in a crash, or they
could even inflate without a crash. To help avoid
injury to yourself or others, have your vehicle
serviced right away if the air bag readiness light
stays on after you start your vehicle.

The air bag readiness light should flash for a few
seconds when you turn the ignition key to ON. If the
light doesn’t come on then, have it fixed so it will be
ready to warn you if there is a problem.

On vehicles with the DIC, a SERVICE AIR BAG
message will be displayed when there is a problem with
the air bag system. See “DIC Warnings and Messages”
in the Index for more information.

Summary of Contents for 2001 Bonneville






























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands