manualshive.com logo in svg

Pontiac 2001 Bonneville, Owner'S Manual

Share
Download
Pontiac 2001 Bonneville Owner'S Manual Download Page 156

2-89

The following buttons are on the systems monitor
control panel which is located to the right of the
instrument panel cluster:
D E/M: Use this button to change the display between

English and metric units.

D TRIP RESET: This button allows you to reset your

trip odometer. To reset the trip odometer, press the
TRIP RESET button. The trip odometer will now
accumulate miles (kilometers) until the next reset.

D TIRE PRESS RESET: This button allows you to

reset the check tire pressure system. To reset the
system or for more information, see “Check Tire
Pressure System” in the Index.

Driver Information Center (DIC) 
(If Equipped)

Your vehicle may have a Driver Information Center
(DIC). The DIC will display information about how
your vehicle is functioning, as well as warning messages
if a system problem is detected.

DIC Displays and Controls

There are two lines in the
DIC display. The bottom
line on the display area is
left blank when the 
DIC displays the driver
number identified when
entering the vehicle.

You can have your dealer program your name 
to replace the driver identifier. See your dealer for 
more information.

Summary of Contents for 2001 Bonneville






























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands