manualshive.com logo in svg

Pontiac 2001 Bonneville, Owner'S Manual

Share
Download
Pontiac 2001 Bonneville Owner'S Manual Download Page 113

2-46

Fog Lamps

The fog lamps button is located below the twilight knob
to the left of the steering wheel.

An indicator light in the button will glow when the fog
lamps are on. Your parking lamps will also come on
automatically while the fog lamps are active.

If your fog lamps are on when you use your high beams
or flash

-

to

-

pass feature, the fog lamps will be disabled

while the feature is being used.

Twilight Sentinel

R

Twilight Sentinel

R

 will keep your headlamps on for 

up to three minutes, to light your way when you leave
your vehicle.

To operate Twilight Sentinel, turn the DELAY knob
located to the left of the steering column on the
instrument panel fully clockwise for the three

-

minute

delay. Turn it counterclockwise to reduce the delay. 
Turn the knob to OFF to turn Twilight Sentinel off.

At night, you can turn off all exterior lamps when you
are in PARK (P) by turning the Twilight Sentinel knob
all the way to OFF. If the knob was already in OFF, it
must be cycled to ON then back to OFF, to turn the
exterior lighting off. The lamps will come back on when
you turn the knob clockwise.

Summary of Contents for 2001 Bonneville






























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands