manualshive.com logo in svg

Pontiac 2001 Bonneville, Owner'S Manual

Share
Download
Pontiac 2001 Bonneville Owner'S Manual Download Page 171

2-104

HUD shows these images when they are lighted on the
instrument panel.

The speedometer may display a difference of 1.5 mph
(2.4 km/h) from the HUD image. This is normal.

When the ignition key is turned to ON, all possible
HUD images will come on, then the HUD will 
operate normally.

If you never look at your instrument panel cluster, you
may not see something important, such as a warning
light. So be sure to scan your displays and controls and
the driving environment just as you would in a vehicle
without HUD.

NOTICE:

Although the HUD image appears to be near 
the front of the vehicle, do not use it as a parking
aid. The HUD was not designed for that purpose. 
If you try to use it that way, such as in a 
parking lot, you may misjudge distance 
and run into something.

Summary of Contents for 2001 Bonneville






























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands