manualshive.com logo in svg

Pontiac 2001 Bonneville, Owner'S Manual

Share
Download
Pontiac 2001 Bonneville Owner'S Manual Download Page 129

2-62

HomeLink

R

 Transmitter (If Equipped)

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: 
(1) this device may not cause harmful interference, and 
(2) this device must accept any interference received,
including interference that may cause undesired operation.

This device complies with RSS

-

210 of Industry Canada.

Operation is subject to the following two conditions: 
(1) this device may not cause interference, and (2) this
device must accept any interference, including interference
that may cause undesired operation of the device.

Changes and modifications to this system by other than
an authorized service facility could void authorization to
use this equipment.

Programming the HomeLink

R

 Transmitter

Do not use the HomeLink Transmitter with any garage
door opener that does not have the “stop and reverse”
safety feature. This includes any garage door opener
model manufactured before April 1, 1982.

Be sure that people and objects are clear of the garage
door you are programming.

Your vehicle’s engine should be turned off while
programming the transmitter. Follow these steps to
program up to three channels:

1. If you have previously programmed a transmitter

channel, proceed to Step 2. Otherwise, hold down
the two outside buttons on the HomeLink
Transmitter until the indicator light begins to flash
rapidly (after 20 seconds). Then release the buttons.
This procedure initializes the memory and erases any
previous settings for all three channels.

Summary of Contents for 2001 Bonneville






























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands