manualshive.com logo in svg

Pontiac 2001 Bonneville, Owner'S Manual

Share
Download
Pontiac 2001 Bonneville Owner'S Manual Download Page 276

5-21

If your vehicle has
aluminum wheels with
plastic nut caps, loosen and
remove them using the
wheel wrench.

If your vehicle has aluminum wheels and a center cover
hides the wheel nuts, remove the center cover by using
the flat end of the wrench to pry it off. Do not drop the
cover or lay it face down, as it could become scratched
or damaged. Do not use a hammer or mallet on this 
type of cover.

Removing the Flat Tire and Installing the
Spare Tire

1. Use the wheel wrench to loosen the wheel nuts, but

don’t remove them.

2. The jack has a bolt at the end. Attach the wheel

wrench to the bolt to create a jack handle.

Summary of Contents for 2001 Bonneville






























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands