20
Version 2.1
Update: April 2016
PONSEL Mesure
– Aqualabo Contrôle
35 Rue Michel Marion
– 56850 CAUDAN, FRANCE
Tel.: +33(0)2 97 89 25 30
– Fax: +33(0)2 97 76 55 72
4. User Interface
4.1 Home screen.
The figure below shows the data displayed on the home screen when two sensors are connected to
the ACTEON 5000. In this specific case, a pH/Temperature combined sensor and an oxygen sensor
are connected to the ACTEON 5000.
1
Primary parameter measured by sensor 1
10
State of the two analog outputs: in this
example, analog output 1 is assigned to
sensor No.1. The red mark indicates
4 mA.
2
Stability indicator for the primary
parameter measured by sensor 1
11
State of Relay 1. In this example, relay 1
is assigned to sensor 1 and is in an open
position.
3
Real-time value of the primary parameter
measured by sensor 1
12
Unit for the secondary parameter
measured by sensor 2
4
Primary parameter measured by sensor 2
13
Real-time value of the secondary
parameter measured by sensor 2
5
Stability indicator for the primary
parameter measured by sensor 2
14
State of the two analog outputs: in this
example, analog output 1 is assigned to
sensor No.2. The red mark indicates 4
mA.
6
Real-time value of the primary parameter
measured by sensor 2
15
State of Relay 2. In this example, relay 2
is assigned to sensor 2 and is in an open
position.
7
Secondary parameter measured by
sensor 1
16
Navigation icon used to access the main
menu
8
Unit for the secondary parameter
measured by sensor 1
17
Logos representing the analog outputs
9
Real-time value of the secondary
parameter measured by sensor 1
18
Secondary parameter measured by
sensor 2
Table 2: description of the home screen.
If only one sensor is connected to the ACTEON 5000 then lines are displayed in the lower part of the
display where the parameter information and units would normally appear.
1
2
5
4
3
6
7
8
9
10
11
12
13
14
15
16
17
18
