93
Hardware Calibration
Under some circumstances, the whiteboard may require re-
calibration by a trained Webster service representative. To help
diagnose hardware calibration issues, your technical support
representative may refer you to the “Hardware Calibration” option of
the Edit menu.
Warning
Use the “Hardware Calibration” option in the Edit menu with caution.
Specific instructions are available from a technical support
representative. Permanent damage to the board may result from
unsupervised use.
TS Whiteboard Calibration
To calibrate the TS whiteboard:
1
Download TS calibration sheets as a PDF file from the PolyVision
web site at www.polyvision.com.
2
Print and cut the one that matches your board’s size, as
described on the calibration sheet.
note:
NOTE:
Make sure that you use the template that is appropriate for your
board size.
Warning beep
One minute before
automatic power down
Draw something on the
board, click on the Webster
application, or extend the
time limit for automatic
power down. Refer to “Cus-
tomizing General Options”
on page 79.
No operating lights
Fuse
Replace fuse in the power
entry module beside the
power connector using T2A/
250V slow blow fuse.
Problem
Cause
Solution
Webster_draft2.book.mif Page 93 Friday, October 11, 2002 10:07 AM
Summary of Contents for Webster IRP
Page 110: ...104 ...