94
3
Place the calibration template in the lower left corner of the
whiteboard making certain to butt it up against the inside lip of
the frame and the top of the tray.
4
With a marker, make a dot on the board at the top right corner of
the calibration template.
5
Place the calibration template in the upper right corner of the
whiteboard making certain to butt it up against the inside lip of
the top and right frames.
6
With a marker, make a dot on the board at the bottom left corner
of the calibration template. Remove the calibration sheet.
7
Choose “Hardware Calibration” from the Edit menu. You will see
the following dialog.
8
Select the board to calibrate.
9
Click “Calibrate.” A dialog appears from which you identify the
dimensions and orientation of your whiteboard.
10
Choose the appropriate size and orientation from the drop down
list.
11
Click “OK.” A dialog appears requesting that you tap a
calibration point at a specific location on the board.
12
Tap the board at the lower left mark you made.
13
Tap the board at the upper right mark you made.
Webster_draft2.book.mif Page 94 Friday, October 11, 2002 10:07 AM
Summary of Contents for Webster IRP
Page 110: ...104 ...
