PolyVision Webster IRP Page 104 User Manual Download

Page: 104 / 115

Technical Support

If reviewing the above sections fails to resolve your hardware or
software problem, contact PolyVision USA Technical Support:

•

Phone:

888-388-0995

Technical support representatives are available Monday
through Friday from 8 AM Eastern time to 5 PM Pacific time.

•

E-mail:

[email protected]

•

Internet: www.polyvision.com

Or, outside the USA, contact PolyVision Europe/Asia Technical
Support:

•

Phone:

+32 (0)89 32 31 30

•

Fax:

+32 (0)89 32 31 31

•

E-mail:

[email protected]

•

Internet: www.polyvision.com

“Send Mail” does not
open an e-mail mes-
sage

Default e-mail application
not specified or config-
ured

On a Macintosh, go to the
Internet control panel and
select a default e-mail
application. In Windows,
go to the Mail control
panel and configure your
mail system.

No “Export” on a
Macintosh

QuickTime 5.0 or higher
“Recommended Install”
required

Install QuickTime from
the Webster installation
CD using the “Recom-
mended Install” option.

Problem

Cause

Solution

Webster_draft2.book.mif Page 98 Friday, October 11, 2002 10:07 AM

Summary of Contents for Webster IRP



















































































































Search results

Summary of Contents for Webster IRP

Reviews:

Related manuals for Webster IRP

Brands by name

Popular brands

PolyVision Webster IRP, User Manual

Search results

Summary of Contents for Webster IRP

Reviews:

Related manuals for Webster IRP

Brands by name

Popular brands