3-26
3 First Steps
15. Product variant MSA-600-X with internal generator: Plug the
ACQ/GEN
Cable (X)
into the
ACQ/GEN
Sub-D jack on the back of the front-end and
into the accordingly labeled SMA or MMCX jacks on
ACQUISITION
and
GENERATOR
(
ACQ CLK
,
ACQ TRIG
,
GEN Clk
,
GEN X0
,
GEN X1
) on the back
of the industrial PC.
Plug the SMA connecting cable into the
SIGNAL
BNC jack on the back of
the front-end and into the
Ch0
SMA jack on the back of the industrial PC.
Use the supplied torque wrench for the SMA connections.
16. Product variant MSA-600-U with external A-ESG-002 Signal Generator:
Plug the
ACQ/GEN Cable (U)
into the
ACQ/GEN
Sub-D jack on the back of
the front-end and into the
Ref In
BNC jack on the back of the signal
generator.
Industrial PC to
signal generator
17. Product variant MSA-600-U with external A-ESG-002 Signal Generator:
Plug the red network cable into the
GENERATOR
network connection on
the back of the industrial PC and into the
LAN
network connection on the
back of the signal generator.
Front-end to
controller
18. With MSA-A-TMS option: Plug the
Trigger Cable
into the
TRIG TMS
BNC
jack on the back of the front-end and into the
DIGITAL I/O
MDR plug-in
connector on the back of the controller.
Controller to
industrial PC
19. Plug the USB cable into the USB connection on the back of the controller
and into a free USB connection on the back of the industrial PC.
Summary of Contents for MSA-600
