manualshive.com logo in svg

Polytec MSA-600, Operating Instructions Manual

Share
Download
Polytec MSA-600 Operating Instructions Manual Download Page 45

3-21

3 First Steps

3.4.1

Connecting the Protective Earth Cable 

 

 

ATTENTION!
Damage to the sensor head caused by improper fastening material!

» Only use the provided fastening material to connect up the protective earth 

cable.

The scope of delivery includes all protective earth cables that you need for the 

safe operation of your measurement system. The standard scope of supply 

includes a protective earth cable which connects the controller and the sensor 

head. With the MSA-A-TMS option another protective earth cable is added 

that leads from the objective positioner to the sensor head.

In order to ensure safe handling of the measurement system, you have to 

correctly connect the protective earth cables to the respective connections of 

the objective positioner, sensor head and controller. The connections for the 
protective earth cables are all marked with the following sign

. 

Connect up the protective earth cables as described in the following.

Summary of Contents for MSA-600




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands