Holding Shift while turning a knob will increase the speed of the knob’s effect. The way
this is performed depends on the knob being used. For example, when used with the
Note knob, the values will jump through entire octaves using the selected note as the
root.
When a long sample still sounds after the sequencer is stopped, you can cut it simply
by touching the Master Volume knob.
The following function knobs are available for your use:
Master Volume
– controls the main output amplification in dB. It’s a global setting, not
related to any particular project.
When you want to cut a long sample that plays through (decaying) after stopping
the sequencer, touch this knob.
Limiter
– a classic, and often essential, dynamics processor. You can use this to prevent
signals above a specific volume level from clipping. Signals above the threshold will be
reduced in volume, while those below the threshold remain unaffected.
Presets for this effect are available in the Master FX section.
