WebOffice and MGC Configuration
27
Configuring the MGC Unit to use an External Database
Application for MGC Version 6.0
Configuring the MGC unit to use an external database application for Polycom MGC
version 6.0 consists of two procedures: setting a flag in the system configuration file, and
editing an XML configuration file and sending it to the MCU.
Setting the External Database Access Flag
You must configure the MCU to access an external database application for validation and
authentication. This is done in the file system configuration file (system.cfg).
To set the external database access flag in the system.cfg:
1.
In the MGC Manager application, double-click the
MCU
icon. Alternatively,
right-click on the
MCU
icon, and the click
Connect
.
