Polycom ViewStation SP User Manual Download Page 84

Page: 84 / 192

Chapter 2

Optional Configurations

ViewStation SP User Guide

www.polycom.com

•

Audio:

The bandwidth used for audio is set to G728 for

optimum audio quality.

Figure 2-43. Audio Quality Screen

Acoustic Plus 716:

•

Checked:

Polycom’s Acoustic Plus



audio technology

provides low bit rate wide band audio (7 KHz/16Kb) quality
without compromising video quality.

•

Not checked

: Disables the acoustic plus feature.

Video/Camera

The

Video/Camera

screen (

System Info > Admin Setup >

Video/Camera

) shown in Figure 2-44 is used to configure the

ViewStation SP video and camera properties. These properties are:

Display Graphics in a Call:

•

Checked:

Graphics (mute, site name and number.)

•

Not checked

: If you disable this feature, no graphics are

displayed on the screen when you're on the video screen in
a call. This is used to provide a clean image without
graphics.

Summary of Contents for ViewStation SP

































































































































































































Search results

Summary of Contents for ViewStation SP

Reviews:

Related manuals for ViewStation SP

Brands by name

Popular brands

Polycom ViewStation SP, User Manual

Search results

Summary of Contents for ViewStation SP

Reviews:

Related manuals for ViewStation SP

Brands by name

Popular brands