Polycom ViewStation SP, User Manual

Page: 107 / 192

Chapter 3 Using the ViewStation SP
© Polycom, Inc., 2001 89 ViewStation SP User Guide
To select the far-site camera during a call:
1. Press the FAR button on the remote control
2. Select 1 or 2 for the desired camera.
The ViewStation SP displays the camera’s current view full-screen
on the television monitor. A
Camera icon facing away from you is
displayed at the top right of the screen.
Figure 3-12. Far Camera Icon
To select another local camera:
1. Press the NEAR button on the remote control twice.
At the bottom of the screen, the ViewStation SP
displays the icons for all of the connected local
cameras.
2. Use the ARROW buttons on the remote control to select
the camera icon.
Some icons might be displayed regardless of the
connection or availability of the cameras. To verify the
connection of auxiliary devices on the ViewStation SP
before use. See the
QuickStart card for the ViewStation
SP model used.
Note The main camera cannot be disconnected. However, a
primary camera, such as a document camera, may be set
as the camera the ViewStation SP uses each time it is
powered on. For more information about selecting a primary
camera, see “Video/Camera,” on page 66
.