Polycom ViewStation SP User Manual Download Page 67

Page: 67 / 192

Chapter 2

Optional Configurations

Polycom, Inc.

ViewStation SP User Guide

Figure 2-27. Gatekeeper Screen

Note

A gatekeeper is not required to make IP to IP Intranet calls.

Specify

Auto

is selected, one of three icons appears on the

ViewStation SP

Main Calling

screen when the ViewStation SP is

rebooted. These icons are:

•

Red Down Arrow: Cannot find gatekeeper.

•

Yellow Box: Found gatekeeper, but not allowed to register.

•

Green Up Arrow: Found gatekeeper and registered.

Dialing Speeds

The

Dialing Speeds

screen (

System Info > Admin Setup

LAN/H.323

> Dialing Speeds

) shown in Figure 2-28 is used to set

the IP and ISDN dialing speeds for the ViewStation SP.

•

Nx56 and Nx64 (left side of screen) represent the dialing speeds
for ISDN (H.320) calls.

•

IPx56 and IPx64 (right side of screen) represent the dialing
speeds for IP (H.323) calls.

The 2x options listed under IPx56 are used for gateway calls from
the ViewStation SP. Non-2x options provide connection speeds from
56 Kbps to 768 Kbps.

Summary of Contents for ViewStation SP

































































































































































































Search results

Summary of Contents for ViewStation SP

Reviews:

Related manuals for ViewStation SP

Brands by name

Popular brands

Polycom ViewStation SP, User Manual

Search results

Summary of Contents for ViewStation SP

Reviews:

Related manuals for ViewStation SP

Brands by name

Popular brands