Polycom ViewStation SP User Manual Download Page 70

Page: 70 / 192

Chapter 2

Optional Configurations

ViewStation SP User Guide

www.polycom.com

The ViewStation SP sends SNMP reports on the following:

•

Low battery power in the remote control.

•

The system is active (powered on) after a long periods of
inactivity.

•

Authentication failure: An attempt has been made to log in as an
administrator with the wrong password.

•

Authentication success: The

dministrator has logged in

successfully.

•

Call failed for reason other than a busy line.

•

A user has asked for help from the Technical Assistance Center.
See “Using the ViewStation SP Help,” on page 19.

•

The ViewStation SP is video call.

•

A telephone or video call has disconnected.

User options on the

SNMP

screen are:

Enable SNMP:

•

Checked:

Enables SNMP management from an SNMP

console.

•

Not Checked:

Disables SNMP management.

Administrator Contact Name:

Enter the name of the person

responsible for remote management of the system. The default
setting is

IT Administrator

SNMP Console IP Address:

Enter the IP address of the SNMP

traps sent by the ViewStation SP. Enter 0.0.0.0 in this field if any
SNMP management console is capable of receiving information
from the ViewStation SP.

Location Name:

Enter the location of the ViewStation. This field

defaults to the ViewStation SP system name at your country
name. For example,

Shellback At United States

Community Name:

Enter the SNMP management community in

which you want to enable the ViewStation SP. The default setting
name for this field is

Public

System Description:

This field displays the type of

videoconferencing device. This field cannot be changed.

Summary of Contents for ViewStation SP

































































































































































































Search results

Summary of Contents for ViewStation SP

Reviews:

Related manuals for ViewStation SP

Brands by name

Popular brands

Polycom ViewStation SP, User Manual

Search results

Summary of Contents for ViewStation SP

Reviews:

Related manuals for ViewStation SP

Brands by name

Popular brands