Polycom ViewStation SP User Manual Download Page 41

Page: 41 / 192

Polycom, Inc.

ViewStation SP User Guide

Optional Configurations

This chapter contains advanced configuration information for the
ViewStation SP384 and the ViewStation SP128.

User Setup

The

User Setup

screen (

System Info > User Setup

) serves as a

quick configuration tool allowing the ViewStation SP administrator or
LAN manager to set basic options for the ViewStation SP (shown in
Figure 2-1).

Figure 2-1. User Setup Screen

Auto Answer:

The

Auto Answer

option allows the ViewStation

SP to automatically answer incoming video calls.

•

Checked:

The ViewStation SP automatically answers

incoming video calls.

•

Not Checked:

Incoming calls rings until they are manually

answered or the far site disconnects.

Mute Auto Answer Calls:

This option turns the microphone pod

off and prevents the far site from hearing the near site when the
ViewStation SP automatically answers incoming video calls.

Summary of Contents for ViewStation SP

































































































































































































Search results

Summary of Contents for ViewStation SP

Reviews:

Related manuals for ViewStation SP

Brands by name

Popular brands

Polycom ViewStation SP, User Manual

Search results

Summary of Contents for ViewStation SP

Reviews:

Related manuals for ViewStation SP

Brands by name

Popular brands