Polycom KIRK 14117800, Installation And Configuration Manual

Page: 87 / 220

Configuring KIRK Wireless Server 600v3 87
KIRK Wireless Server 600v3 Installation and Configuration Guide
7.5.4 Configuring DECT System
1
Under the Configuration menu, click DECT , and then click System .
Figure 22
Adm. Page: Configuration/DECT/System page
2
In the Name field, the name MUST ALWAYS be DECT .
If changing the name, the system cannot operate.
3
In the PWD (password) field, type the password, and then type it again in the field
below.
4
From the Subscriptions list, select either With User AC , With System AC or Disable.
Note:
It is recommended to select With User AC . When subscribing a new handset to
the system it is possible to use an authentication code (AC). If you want to use the
authentication code, you must select With User AC . For more information about
subscription of handsets and authentication codes, refer to “Subscribing Handsets”
on page 152
5
From the Tones list, select a ring tone.
6
Enbloc Dialing check box:
Call handler specific, refer to KWS600v3 Configuration Guide for the relevant call
handler.
7
Local R-Key/Display Handling check box:
Call handler specific, refer to KWS600v3 Configuration Guide for the relevant call
handler.
8
DTMF through RTP channel check box: