Polycom KIRK 14117800, Installation And Configuration Manual

Page: 196 / 220

196
Configuration of the Update Server
14117800, Ed.2.6
13.5.7 Example
A Web server exists at the address 192.168.0.10 with a subdirectory called configs . In this
directory, there are two further subdirectories, in which the current firmware files for all
KIRK devices are stored. Clients provide the DHCP server with the option #215 as http:/
/192.168.0.10/configs/. In this directory, there is a file update-ip1200.htm , which
processes the following lines:
mod cmd UP1 times /allow 23,0,1,2,3,4 /initial 6
mod cmd UP0 scfg http://192.168.0.10/configs/saved/ #h.txt
mod cmd UP0 prot http://192.168.0.10/configs/04-5679 / ser 04-5679
mod cmd UP1 check ser 20040330-01
config change PHONECFG0 /coder G729A,60, /lang eng / protect
config change PHONEAPP0 /f4-10 BellOff /f4-v0 %1BE /f5- 10 BellOn /f5-v0 %1BF
config write
config activate
iresetn
This example demonstrates how the configuration of a device is stored on a Web server;
all IP1200 devices are then instructed to load/update the firmware version 04-5679 in the
time period 23:00 hrs to 04:59 hrs. New devices are updated after a restart and after the
specified six minutes have elapsed. The devices are configured so that they use the G729
codec with a frame size of 60ms, the language setting is English and the configuration is
write-protected. Therefore, only an administrator with appropriate authorisation can
change this file. In addition, two standard functions were programmed for the device.